৳600 বা তার বেশি অর্ডারে Steadfast কুরিয়ার ডেলিভারি চার্জ মাত্র ৳85। অর্ডার কনফার্ম হবার পরের দিন কুরিয়ারে শিপ করা হবে। কুরিয়ারে ডেলিভারি হতে সাধারণত 2–4 দিন এবং পোস্ট অফিসে 2–5 কর্মদিবস লাগতে পারে। --

৳600 বা তার বেশি অর্ডারে কুরিয়ার ডেলিভারি চার্জ মাত্র ৳85।

অর্ডার কনফার্ম হবার পরের দিন কুরিয়ারে শিপ করা হবে। কুরিয়ারে ডেলিভারি হতে সাধারণত 2–4 দিন এবং পোস্ট অফিসে 2–5 কর্মদিসব লাগতে পারে।

ADS1115 4-Channel 16-Bit Precision Analog-to-Digital Converter (ADC) Module with PGA

Upgrade your microcontroller project with precision using the ADS1115 16-Bit ADC Module. Featuring 4 single-ended or 2 differential input channels, an internal Programmable Gain Amplifier (PGA) up to 16x, and an easy-to-use I2C interface, this breakout board brings high-accuracy analog measurements to microcontrollers like the ESP32, ESP8266, and Raspberry Pi.
Availability: In stock
Delivery date: 2-3 days
Old price: 690.00৳
260.00৳
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options

Overview

Bring laboratory-grade analog measurement capabilities to your embedded prototyping with the ADS1115 4-Channel 16-Bit ADC Module. While popular microcontrollers like the ESP32, ESP8266, and Raspberry Pi feature limited or low-resolution analog-to-digital conversion, the ADS1115 delivers ultra-precise, low-power 16-bit sigma-delta conversion over a standard 2-wire I2C interface.

Equipped with an integrated Programmable Gain Amplifier (PGA) that scales smaller voltage inputs down to ±256mV, this module captures millivolt-level fluctuations with total linearity. It supports up to four distinct software-selectable I2C addresses (0x48 to 0x4B), allowing you to cascade multiple modules on a single bus to monitor up to 8 channels.

Key Features & Highlights

  • ADC Resolution: 16-Bit High-Precision Sigma-Delta Converter
  • Operating Voltage: 2.0V to 5.5V DC
  • Input Channels: 4 Single-Ended Inputs or 2 Differential Input Pairs
  • Programmable Gain Amplifier (PGA): Amplifies input signals up to x16 (Supports full-scale ranges from ±256mV to ±6.144V)
  • Data Sample Rate: Programmable from 8 SPS up to 860 Samples per Second (SPS)
  • Interface Protocol: Standard I2C Interface (Configurable addresses: 0x48, 0x49, 0x4A, 0x4B)
  • Low Power Consumption: Continuous mode: 150 µA; Single-shot mode with automatic power-down (< 2 µA)

Typical Applications

  • Precision sensor measurements (thermocouples, gas sensors, light sensors)
  • Battery voltage and solar power monitoring systems
  • ESP32, ESP8266, and Arduino IoT sensor expansion nodes
  • Portable instrumentation and industrial automation data logging

Technical Datasheet & Architecture

1. Functional Architecture

  • Input Multiplexer (MUX): Supports either four single-ended inputs (A0, A1, A2, A3) or two differential input pairs (A0-A1, A2-A3) for common-mode noise cancellation.
  • Conversion Modes: Switch between Continuous-Conversion Mode (running current ~150 µA) and Single-Shot Mode (automatic shutdown drawing < 0.5 µA).
  • Digital Comparator: Programmable comparator with an alert/ready (ALERT/RDY) output flag for threshold interrupt triggers.

2. Electrical Characteristics

Parameter Operating Range / Condition
Supply Voltage (VDD) 2.0V to 5.5V DC
Current Consumption (Continuous) 150 µA (Typical), 200 µA (Max)
Current Consumption (Power-Down) 0.5 µA (Typical at 25°C)
Programmable Data Rate (SPS) 8, 16, 32, 64, 128, 250, 475, 860 Samples Per Second
Effective Resolution 16 Bits (No missing codes)
Linearity (INL) ±0.25 LSB (Typical)
Operating Temperature Range -40°C to +125°C

3. I2C Addressing Configuration

Configure the slave address by linking the ADDR pin as follows:

ADDR Pin Connection Target I2C Hex Address
GND 0x48
VDD 0x49
SDA 0x4A
SCL 0x4B

4. Pinout Definition Matrix

Pin Name Pin Type Functional Description
VDD Power Supply Positive supply voltage (2.0V to 5.5V)
GND Power Supply System Ground reference
SCL Digital Input I2C Serial Clock Line
SDA Digital I/O I2C Serial Data Line
ADDR Digital Input I2C Address Selection Pin
ALRT Digital Output Comparator Alert or Conversion Ready flag (Open-drain)
A0 – A3 Analog Input Analog input channels 0 through 3

Package Includes

  • 1 x ADS1115 16-Bit 4-Channel ADC Breakout Module
  • 1 x 10-Pin Straight Male Header Strip
Only registered users can write reviews
You have no items in your shopping cart.